-
Inconel Alloys
Properties
Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally induced crystal vacancies (see Arrhenius equation). Inconel’s high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy. In age-hardening or precipitation-strengthening varieties, small amounts of niobium combine with nickel to form the intermetallic compound Ni3Nb or gamma prime (γ’). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures. The formation of gamma-prime crystals increases over time, especially after three hours of a heat exposure of 850 °C, and continues to grow after 72 hours of exposure.
Manufacturer of Inconel Alloy Rods, Bars & Wires
Calico Metal has Inconel which is a nickel-chromium alloy utilized for applications that require erosion and high temperature resistance. This nickel alloy was intended for service temperatures from cryogenic to elevated temperatures in the scope of 2000° F. It is non-attractive, has fantastic mechanical properties, and presents the alluring blend of high quality and great weldability under an extensive variety of temperatures
Specification
Standard ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Size 1mm to 200mm diameter Type Bars, Rods, wire Manufacturer of Inconel Alloy Plates & Sheets
Calico Metal offer an extensive variety of Inconel Sheets and Plates. These top quality Inconel Sheets and Plates are broadly prescribed for their high resistance to destructive medium, warmth and anxiety consumption splitting. Our plates are generally utilized as a part of different designing and modern ventures. These Inconel Plates can be modified according to our customers’ required details.
Specification
Standard ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443 Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Value Added Service
- Heat treatment
- Annealed & pickling
- Rolling, cutting, bending, forging, minor fabrication, etc.
Manufacturer of Inconel Alloy Pipes & Tubes
Calico Metal broadens a subjective scope of Inconel Pipes to our customers that is fabricated in consistence with set industry standards. These pipe fittings are made in accordance with the different needs of commercial ventures and are given to them at very high rates. It is highly dependable and shows phenomenal resistance to consumption.
Specification
Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Types Seamless / ERW / Welded/ Fabricated Range 15 NB up to 600 NB in SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS Form Round, Square, Rectangular, Hydraulic etc. Length Single Random, Double Random & Cut Length End Plain End, Beveled End, Threaded Applications
- Petrochemicals Plants
- Oil Refineries
- Fertilizers Plants
- Sugar Mills
- Chemical Plants
- Pharmaceuticals
- Textile Machinery
Manufacturer of Inconel Alloy Flanges
Calico Metal give the clients an incredible quality scope of Inconel Flanges, which are made from high review quality crude materials. These Inconel Flanges can be customise according to our valuable clients details. These Inconel Flanges are broadly known for its toughness and quality. Our Inconel Flanges can be profited at industrial driving cost.
Specification
Standard ANSI/ASME B16.5, ANSI B16.47 API, DIN, JIS, BS Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Size 1/2 inch – 48 inch (15mm – 1200mm) Types Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features
- Durability
- Corrosion resistance
- Dimensional accuracy
- High strength
- Excellent finish
Manufacturer of Inconel Alloy Buttweld Fittings
Calico Metal has produced from diverse grades of Inconel, these fittings find broad application crosswise over different commercial industries. Our scope of buttweld fittings incorporate elbow 90 deg, elbow 45 deg, elbows 180 deg, diminishing elbow, tees, crosses and concentric/unusual reducers. Accessible in diverse determinations, we offer these buttweld fittings at the most competitive costs.
Specification
Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Range 15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS Types Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg, long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, crosses, short/long neck stub-ends Application
- Petrochemicals Plants
- Chemical Plants
- Industrial Machinery
- Power Industry
- Government Companies
Manufacturer of Inconel Alloy Forged Fittings
Calico Metal offers an extensive variety of Inconel Forged Fittings that are produced from quality quality checked & tested components. Known for its amazing and solidness, these inconel fittings are generally utilized as a part of different commercial industries over the globe.
Specification
Standards ASTM / ASME SB 564 Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Types • Elbow – 90 Deg. & 45 Deg
• Tee – Equal & Reducing
• Union, Cross, Coupling – Full & Half
• Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, NipoletApplication
- Petrochemicals Plants
- Chemical Plants
- Industrial Machinery
- Power Industry
- Government Companies
Manufacturer of Inconel Alloy Fasteners
Calico Metal has extensive variety of inconel fasteners includes high mechanical quality, close dimensional resilience and superb wrapping up. These fasteners are straightforward for simple establishment and evacuation. We offer a complete arrangement of clasp including stud screws, hex fasteners, square screws, hex nuts, t-head fasteners and so on. Accessible in diverse evaluations of inconel with changing measurements at the most competitive costs.
Specification
Standard ASTM / ASME SB 163 / 167 / 517 / 704 / 705 Grades Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Types Bolts Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts, Structural Bolts. Features
- Optimum strength
- Corrosion resistance
- Long service life
- Fine finish
-
Monel Alloys
There are number of characteristics in Monel alloys that make them very useful such as great resistance to seawater, great resistance to stress corrosion cracking, resistance to hydrofluoric and hydrochloric acids, superb resistance against alkaline and neutral salt, great resistance to alkalis etc. on account of these characteristics, the monel alloys find extensive use in the applications such as hydrocarbon and chemical processing equipment, freshwater and gasoline tanks, de-aerating heaters, marine engineering, crude petroleum stills, distillation towers of crude oil, heat exchangers, chlorinated solvents, valves, shafts, pumps, fasteners, fittings etc.
Manufacturer of Monel Alloy Rods, Bars & Wires
Monel round bars offered by Calico Metal are exceedingly tough and consumption safe, made of Monel400. Keeping in mind the end goal to meet the requests of our household and global customers, they come in alternative of fluctuated measurements, lengths and thickness. Our scope of monel round bars are accessible in diverse grades.
Specification
Standard ASTM / ASME SB 164 Grades Monel 400, Monel k500 Range 5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length Manufacturer of Monel Alloy Plates & Sheets
Calico Metal offers an extensive variety of Monel Sheets and Plates that discovers application in different commercial enterprises over the globe. Made from quality crude material, these monel plates and monel sheets are referred to for its one of a kind elements, for example, tight resilience, smooth surface and uniform mechanical properties.
Specification
Standard ASTM / ASME SB 127 Grades Monel 400, Monel k500 Monel Sheets Thickness 1.5mm to 4mm Monel Plates Thickness 5mm to 150mm Value Added Service
- Heat treatment
- Annealed & pickling
- Rolling, cutting, bending, forging, minor fabrication, etc.
Manufacturer of Monel Alloy Pipes & Tubes
CalicoMetals offers an extensive variety of monel pipes that are known for their phenomenal execution. These pipes are utilized as a part of the soda pop industry on the grounds that it’s harmless to human body. These pipes have high resistance to temperature, with the goal that it can be utilized for transportation of boiling hot water, substance and gas. A percentage of the particulars are as per the following:
Specification
Grades Monel 400, Monel k500 Types Seamless / ERW / Welded/ Fabricated Form Round, Square, Rectangular, Hydraulic etc. Length Single Random, Double Random & Cut Length End Plain End, Beveled End, Threaded Applications
- Hot Dipped Galvanizing
- Epoxy & Fbe Coating
- Electro Polish
- Draw & Expansion
Manufacturer of Monel Alloy Flanges
CalicoMetals are providing a subjective scope of monel flanges which are accessible in different structures and models. These flanges are accessible in diverse sizes and are in consistence with universal norms. We offer these flanges in different particulars and in this way are requested in both residential and universal markets. We offer these flanges at business sector leading costs.
Specification
Grades Monel 400, Monel k500 Range 1/2″ NB to 60″ NB Types Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features
- Durability
- Corrosion resistance
- Dimensional accuracy
- High strength
- Chemical resistance
- Excellent finish
Manufacturer of Monel Alloy Buttweld Fittings
CalicoMetals is occupied with offering an extensive variety of monel fittings that are built with exactness plans and as per most recent innovation by specialists work force. Meeting the assorted needs of diverse businesses these fittings are accessible in altered determinations at most competitive rates. These fittings are accessible according to the accompanying details:-
Specification
Application
- Petrochemicals Plants
- Chemical Plants
- Industrial Machinery
- Power Industry
- Government Companies
Manufacturer of Monel Alloy Forged Fittings
CalicoMetals being a quality driven association, we offer astounding Monel Forged Fittings. The extent is acclaimed and acknowledged over the globe for its quality and exact outline. They are made utilizing high review crude materials obtained from guaranteed merchants. Our reach incorporates Monel Forged Elbow, Monel Forged Tee, Monel Union, Monel Cross, Monel Swage Nipple, Monel Plug and Monel Bushing
Specification
Grades Monel 400, Monel k500 Types Seamless / ERW / Welded/ Fabricated Form Round, Square, Rectangular, Hydraulic etc. Length Single Random, Double Random & Cut Length End Plain End, Beveled End, Threaded Application
- Petrochemicals Plants
- Chemical Plants
- Industrial Machinery
- Power Industry
- Government Companies
Manufacturer of Monel Alloy Fasteners
CalicoMetals has monel fasteners that are composed with most recent innovation and upgraded hardware, which brings about superior scope of levelers. These levelers are accessible in distinctive determinations at most focused costs. These are accessible in Monel 400, Monel 500 evaluations. Our monel fasteners are accessible in shifting thickness of 0.1 mm, 0.2mm, and so on with diverse details.
Specification
Grades Monel 400, Monel k500 Range 1/2″ NB to 60″ NB Types Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features
- Optimum strength
- Corrosion resistance
- Long service life
- Fine finish
-
duplex & super duplex Steel Plates
There are number of qualities in the duplex and super duplex sheet/ plates offered by us such as good workability and weldability, high strength, combination of ferritic and austenitic mixture properties, low thermal expansion rate etc. On account of these qualities, the duplex and super duplex sheets/plates are extensively used in variety of applications such as:
- Heat exchangers
- Oil field piping
- Food process equipment
- Sea water equipments
- Chemical process vessels
- Petrochemical equipments
- Bleach washers
- Pulp mill digesters
- Chip presteaming vessels
Duplex & Super Duplex Steel Plates
Range :
5mm To 100mm thick in 1000 mm To 2500mm width & 2500 mm to 12500 mm Length available with Nace MR 01-75.Types :
Sheet, Plates, Coils, Flat, Strips, Profile, Blank, Circle, Ring etc.MATERIALS
Duplex & Super Duplex Steel Plates
UNS S31803, S32205, S32750, S32760
Duplex & Super Duplex Steel Sheets
Range :
1 mm To 3 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.Types :
Sheet, Plates, Coils, Flat, Strips, Profile, Blank, Circle, Ring etc.MATERIALS :
Duplex & Super Duplex Steel Sheets
UNS S31803, S32205, S32750, S32760
-
Duplex & Super Duplex pipes tubes
On account of the above mentioned properties, the duplex-super-duplex-pipe-tubes find extensive use in the applications where there is requirement of good impact toughness, high intensity, high pressure work, ability to avoid crack and patch, greater corrosion resistance compared to the standard duplex grades such as:
- Petrochemical
- Geothermal
- Oil & Gas
- LNG
- Pharmaceutical
- Desalination of water
- Solar power
- Mining
- Nuclear power
- Biomass
RANGE :
TUBING SIZE : 1/2″ OD TO 4″ OD (IN ALL THICKNESS)
NOMINAL BORE (NB) SIZES : 1/2″NB TO 48″ NB (IN ALL THICKNESS)QUALITY :
DUPLEX & SUPER DUPLEX STEEL
UNS S31803, S32205 (2205),S32750 (2507), S32760 (Z-100)
S32900 (329), S32304, F-51, F-53, F-54, F-55 & F-60 & HIGH NICKEL ALLOYSTYPE :
WELDED (ERW) PIPES, FEBRICATED PIPES & SEAMLESS PIPESEND :
PLAIN END, BEVELLED END & THREADED ENDSHAPES :
ROUND & SQUAREVALUE ADDED SERVICES :
- Annealed
- Anodising
- Bending
- Casting
- Cutting
- Centreless Grinding (Cg)
- Draw & Expansion
- Drilling
- Electroplating
- Fabricate (With Radiography)
- Heat Treatment (Hardening & Tempering)
- Machining (Cnc)
- Minor Fabrication
- Pickled
- Polish (Electro & Commercial)
- Sand Blasting
- Threading (As Per Guage)
- Welding
TEST CERTIFICATION :
Our Materials Are Tested To Relevant Standard And Wherever Possible We Give Original / Copy Of Test Certificate With Heat Number As Well As Govt. Approved Laboratories Test Certificate Can Also Be Provided. We Supply the Material under Inspection of Any Third Party Inspection Agency as per the Client’s Requirements Such As :
1) Bv- Bureau VERITAS Industrial Services (India) Pvt. Ltd
2) Lloyds Inspection Agency
3) Rina
4) Irs – International Register Of Shipping (Irs)
5) Dnv – Det Norske Veritas
6) Tcs – Tata Consultancy Services
7) Tuv India -
Duplex & Super Duplex Flanges
There is a great connectivity to pipes in Super Duplex flanges they have long life in the applications having low to high pressure like refinery industry. Their corrosion resistance levels are also very high and therefore they are well preferred in the chemical and marine industries. The Duplex & Super Duplex Flanges are exceptionally useful for the applications such as:
- Equipments of oil and gas industry.
- Offshore oil production
- Equipment of pulp and paper mill
- Desalination plants
- Marine applications
- Structural and mechanical equipments
- Heat exchangers
- Power industry
- High pressure seawater piping and RO plants
- Fire fighting systems
RANGE :
1/2″ NB TO 48″NB.QUALITY :
DUPLEX & SUPER DUPLEX STEEL
UNS S31803, S32205 (2205),S32750 (2507), S32760 (Z-100)
S32900 (329), S32304, F-51, F-53, F-54, F-55 & F-60 & HIGH NICKEL ALLOYSFORM :
Duplex and Super Duplex Weldneck, Duplex and Super Duplex Slipon, Duplex and Super Duplex Blind, Duplex and Super Duplex Socket Weld, Duplex and Super Duplex Lap Joint, Duplex and Super Duplex Spectacles, Duplex and Super Duplex Ringjoint, Duplex and Super Duplex Orifcase, Duplex and Super Duplex Long Weldneck, Duplex and Super Duplex Deck Flange, etc.NACE :
MR 01-75, MR 01 03CLASS :
150#, 300#,400 #,600#,900#, 1500# & 2500 #.VALUE ADDED SERVICES :
- Annealed
- Anodising
- Casting
- Centreless Grinding (CG)
- Drilling
- Electroplating
- Forging
- Heat Treatment (Hardening & Tempering)
- Machining (CNC)
- Pickled
- Polish (Electro & Commercial)
- Threading (As per Guage)
- Welding
TEST CERTIFICATION :
Our Materials Are Tested To Relevant Standard And Wherever Possible We Give Original / Copy Of Test Certificate With Heat Number As Well As Govt. Approved Laboratories Test Certificate Can Also Be Provided. We Supply the Material under Inspection of Any Third Party Inspection Agency as per the Client’s Requirements Such As :
1) Bv- Bureau VERITAS Industrial Services (India) Pvt. Ltd
2) Lloyds Inspection Agency
3) Rina
4) Irs – International Register Of Shipping (Irs)
5) Dnv – Det Norske Veritas
6) Tcs – Tata Consultancy Services
7) Tuv India -
Duplex & Super Duplex Fittings
Our products ensure high pressure sustainability as they are tested under the highest of pressures and are as per the international standards. As compared to ferrtic and austentic steels, the duplex and super duplex fittings offer higher strength and range of corrosion resistance properties. The duplex and super duplex fittings are used across different industries as they are safe for a vast number of applications such as:
- Heat exchangers
- Shipbuilding
- Pulp and paper
- Marine construction
- Pipe systems in chemical tankers
- Blast walls on the offshore platforms.
RANGE :
1/2”NB TO 24”NB IN SCH 5 TO SCH XXSFORM :
ELBOW IN LONG & SHORT RADIUS IN 45DEG, 90 DEG, 180DEG.
EQUAL, UNEQUAL TEE & BERRED TEE
CAPS & CROSSES
LONG & SHORT STUB END
SWAGE NIPPLE & BARREL NIPPLEQUALITY :
DUPLEX & SUPER DUPLEX STEEL
UNS S31803, S32205 (2205),S32750 (2507), S32760 (Z-100)
S32900 (329), S32304, F-51, F-53, F-54, F-55 & F-60 & HIGH NICKEL ALLOYSTYPE :
WELDED (ERW, FEBRICATED & SEAMLESSDIMENTIONAL STANDARDS :
ANSI B16.9SCHEDULES :
Sch 5 to Sch XXS (special wall thicknesses on request)SIZE RANGE :
½” to 80” NB -
Duplex & Super Duplex Bars Wires
It gives double strength to the structure. The Duplex Steel Round Bars give a much higher resistance against corrosion cracking and uniform erosion. These Duplex Steel Round Bars offer higher performance in a lesser expensive way. The chemical, oil and gas technology industries all over the world use these highly resistant Duplex Steel Round Bars.
DUPLEX & SUPER DUPLEX ROUND BAR, RODS
RANGE: DIA 6 MM TO 300 MM (100 MM TO 12000 MM LONG)
FORM: ROUND BAR, SQUARE BAR, FLAT BARS & HEX BAR.
FINISH : BRIGHT BARS, BLACK BARS & FORGED BARS
GRADE: DUPLEX STEELS : 2205, 31803, UNS -S32205, UNS-S31803
SUPER DUPLEX STEEL : 2507, ZERON-100, UNS-S32750, UNS-S32760, UNS-S32550,UNS-S39274
STAINLESS STEEL : 304 / 304L, 321, 347, 316/ 316L / 316Ti, 317 / 317L, 310s- Other grades of Duplex & Super Duplex Bars & Rods
- Duplex Sheets Round bars & Wires
- Super Duplex Round bars & Wires
- Duplex Sheets UNS S31803 Round bars & Wires
- Super Duplex UNS S32205 Round bars & Wires
- Duplex & Super Duplex UNS S32750 Round bars & Wires
-
Stainless Steel Circles
Grade :Stainless Steel : 304, 304l, 316, 316l, 310, 317l, 321 Thickness :1 Mm To 100 Mm Diameter :Upto 2000 Mm Cutting :Plazma & Machined Cut Do Ask For Stainless Steel 321 / 347 / 304 / 304 L /316 / 316 Ti/316 L Plates Ready Stock Prime
With TcApplications :
Typical applications include : - • Food processing equipment.
- • Kitchen benches, sinks, troughs, equipment and appliances
- • Chemical containers, including for transport
- • Heat Exchangers.
- • Fabrication industries.
- • Heavy machinery industries.
- • Pressure vessels.
Other grades of Stainless Steel Circles
Stainless Steel 304 / 304l Circles Stainless Steel 310 / 310S Circles Stainless Steel 316 / 316L Circles Stainless Steel 321 / 321H Circles Stainless Steel 347 / 347H Circles Stainless Steel 410 Circles -
Angle, Channel & Flats
- Material :Stainless Steel
- Grade :202, 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, etc.
- Standard :ASTM / ASME A/SA 240
- Form :Roll-formed metal
- Angle :Varied, most commonly 90 degree
- Leg :Two of same length
- Size :3 / 4/5 / 6 x 25 x 25, 3 / 4/5 / 6 x 30 x 30
3 / 4/5 / 6/7 x 40 x 40, 4 / 5/6 / 7 x 50 x 50
4 / 5/6 / 7/8 x 60 x 60, 5 / 6/7 / 8/9 x 70 x 70
6 / 7/8 / 9/10 x 75 x 75, 6 / 7/8 / 9/10 / 11 / 12 x 80 x 80
7 / 8/9 / 10 / 11 / 12 x 100 x 100
-
Fittings
ANSI/ASME fittings and ISO fittings
- Butt weld fittings
- Socket weld fittings
- Threaded fittings
- Threaded fittings
- Outlets
Specifications:
- ASTM A 403WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L
- Others: Monel, Nickel, Inconel, Hastelloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc & Lead
- Types: Elbow, Tee, Reducer, Return Bends, Stub-Ends, Collar & Insert
- Size: 1/4″NB to 32″NB. (Seamless and Welded) wall thickness Schedule 5S to schedule XXS
-
Pipes & Tubes
A-312, A-335 Seamless Pipe, Welded Pipe, Seamless Pipe, ERW Pipe Supplier
Sr. No.
Material Size Sch.
Specification
Manufacturer 1 Seamless Pipe 15 NB
To
300 NBSch. 5s
Sch. 10s
Sch. 40s
Sch. 80s
Sch. 160s
Sch. XXSA-312 Imported
Choksi
Remi &
Ratnamani2 Welded (ERW) Pipe 15 NB
To
300 NBSch. 5s
Sch. 10
Sch. 40s &
Sch. 80sA-312 Remi
Ratnamani
Vishal
Suraj
C.D. Prakash
Heavy
Imported Etc.3 Welded (ERW) Pipe 150 NB
To
600 NBSch. 5s
Sch. 10s
Sch. 40s &
Sch. 80sA-358 Fabricated at Famous
Prakash
Vishal (with Radiography)Note : Grade
: TP 304, TP 304H, TP 304L, TP 304LN, TP 316, TP 316H, TP 316L, TP 316LN, TP TP 316Ti, TP 309, TP 310, TP 317L, TP 321, TP 347, TP 409, TP 410, TP 420, TP 430, TP 446,
TP 202 Etc.Special Pipes : Fabricated Pipe (with radiography) In Form of : Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, ‘U’ Shape, Hydraulic pipe etc. In Length of : Standard & Cut length Value Added Service : Draw & Expansion as per required Size & Length
Polish (Electro & Commercial) Heat Treatment
Bending
Annealed & Pickled
Sand Blasting
Machining Etc.Test Certificate : Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party InspectionSpecialize : Fabricated Pipe, Square & Rectangle & Other Odd Size Carbon Steel Pipes
Sr. No.
Material Size Sch. & Swg.
Specification
Manufacturer 1 Seamless Pipe 15 NB to
300 NBSch. 40s To
Sch. XXsA-335
SeamlessISMT / Kalyani / Imported with LRS & IBR Test Certificate Note : Pipe in Grade
: ASTM A 335 –P1, P2, P5, P9, P11, P12, P21, P22 & P91 Etc. (with IBR Test Certificate) In Length of : Standard Double & In Cut length also. Value Added Service : Draw & Expansion as per required Size & Length, Heat Treatment, Bending
Annealed, Machining Etc.Test Certificate : Manufacturer Test Certificate, IBR Test Certificate ,Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection Mild Steel & Galvanised Pipes
Sr. No.
Material Size Sch. & Swg.
Specification
Manufacturer 1 Mild Steel (M. S.) & G. I. 15 NB to
150 NB‘A’ Class
‘B’ Class
‘C’ ClassIS 1239 Tata
Zenith
Jindal
Mukat
Lloyds
Lalit Profiles Etc.200 NB to
500 NB4.85 mm
to
12.7 mm Thk.IS 3589
(Fe 330, Fe 410)Note : In Form of
: Round, Square, Rectangle Special Pipes : Standard & Cut length In Length of : Standard & Cut length Value Added Service : Draw & Expansion as per required Size & Length Galvanizing, Etc. Test Certificate : Manufacturer Test Certificate, Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection Specialize : Square Tube, Rectangle Tube & Odd Size Nickel Alloys Pipes
Sr. No.
Material Size Sch. & Swg.
Specification
Manufacturer 1 Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex15 NB to 150 NB Sch. 10
Sch. 40
Sch. 80 Etc.IS
BS
ASTM
UNSImported & Indian Mfg. Note : Nickel Alloy in Grade
: Cupro Nickel, Hastelloy, Nickel, Monel , Inconel , Incolloy Alloy 20, Duplex Steel, SS 904L, Etc.
90/10, 70/30, 66/30/2/2 , C-4, C-22, C276, B-2 , 200 / 201 / 205
400 & K500, 600, 601, 625 & 825 ,800, 800HIn Form of : Round , Etc. In Length of : Standard & Cut length Value Added Service : Draw & Expansion as per required Size & Length, Heat Treatment, Annealed
Machining Etc.Test Certificate : Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection Specialize : Cupro Nickel Tube Non Ferrous Pipes
Sr. No.
Material Size Swg. Specification Manufacturer 1 Copper
Brass
Aluminium
Phosphorus Bronze
Gun Metal
Lead2 mm OD to
152 mm OD16 Swg.
14 Swg.,
12 Swg.
10 Swg.16 Swg.
14 Swg.,
12 Swg.
10 Swg.IS
BS
ASTMIndian Note : Copper Brass Lead In Grade : Dow & PVC Coated 63/37, 70/30, Admiralty Brass, Aluminium Brass
(99.95 to 99.99)Special Tube : Referigeration Tubes, Annealed Tube Etc. In Form of : Straight, Round, Coil, Shaft, Bush, U’ Shape Etc. In Length of : Standard length & In Cut length also. Test Certificate : Laboratory Test Certificate from Govt. Approved Lab. &
Under Third Party Inspection
with Excise Gate Pass to avail Modvat benefit.Value Added Service : Draw & Expansion as per required Size & Length
Bending
Anneling & Pickled Etc.Hardness : Soft, Hard, Half Hard, Quarter Hard Etc. Specialize : De-oxidize Copper Tube (99.99% Cu) & Admiralty Brass Tube NOTE : Non ferrous pipe come in od form . Other grades of Stainless Steel Pipes
Seamless Pipes Welded Pipes ERW Pipes Carbon Steel Pipes Mild Steel & Galvanised Pipes Nickel Alloys Pipes Non Ferrous Pipes
- +91-79 -2278 0000/30
- info@calicometals.in